All Product Categories : Austin Scientific Direct

Quote Basket: 0 Items

Home

Products

New Cryopumps

New 10K Coldheads

New Helium Compressors

Cryopump Parts

Helium Compressor Parts

Accessories

Repair & Exchanges

View All Products

All Products sorted by Categories

FAQs

Quote Basket

0 items

Please complete our enquires form to contact us More »

www.oxinst.com

Categories and Sub-Subcategories	Products
Helium Compressor Parts » Adsorbers »	Helium Compressor Adsorber - ASC Model 125W, CTI Model 8300
	Helium Compressor Adsorber - ASC Model M125-AC
	Helium Compressor Adsorber - ASC Model M600
	Helium Compressor Adsorber - CTI Model 450/1020
	Helium Compressor Adsorber - CTI Model 9600/8500/8510/8200/SC
	Helium Compressor Adsorber, AD-202/1L02W/1RO2W
	Helium Compressor Adsorber, AD-HC-2/4
	Helium Compressor Adsorber, HC-8
	Helium Compressor Adsorber, Leybold Model CP4000/6000
	Helium Compressor Adsorber, Leybold Model RW3/RA3
	Helium Compressor Adsorber, Leybold Model RW4000/6000
	Helium Compressor Adsorber, VARIAN/EBARA, AD-0200/313/323/2.1
Cryopump Parts » Vacuum Side Parts » 15K Charcoal Arrays »	Compatible w/ Cryo-Torr10/CryoPlex10, 15K Charcoal Array Kit
	Compatible w/ Cryo-Torr100, 15K Charcoal Array Kit
	Compatible w/ Cryo-Torr400/CryoPlex16, 15K Charcoal Array Kit
	Compatible w/ Cryo-Torr500, 15K Charcoal Array Kit
	Compatible w/ Cryo-Torr8/CryoPlex8, 15K Charcoal Array Kit
	Compatible w/ Cryo-Torr8F, 15K Charcoal Array Kit
	Compatible w/ Cryo-Torr8FOB, 15K Charcoal Array Kit (Enhanced)
	Compatible w/ CryoPlex10, 15K Charcoal Array Kit
	Compatible w/ CryoPlex8 Low Profile, 15K Charcoal Array Kit
	Compatible w/ CryoPlex8, 15K Charcoal Array Kit
Accessories » Helium Lines & Fittings »	1/2" Aeroquip Dust Plug
	1/2" Aeroquip Flat Gasket Seal
	3 Position, Gas Plenum Manifold
	Aeroquip O-Ring
	Bulk Head Union Assembly
	Dust Cap Cover
	Female Fitting, No Adapter
	Helium Charge Line, 10ft SS
	Helium Charge Line, 10FT, SS, 1/4" Aeroquip, Model M600
	Helium Elbow
	Helium Line, .5", 10' LNG, SS, 90°x1
	Helium Line, .5", 20' LNG, SS, 90°x1, 1/2FAQ
	Helium Line, 0.5"ID, 10FT LNG, Standard 1/2" Aeroquip
	Helium Line, 10' LNG, 3/4FAQ
	Helium Line, 20' LNG
	Helium Regulator Assembly
	Helium Tee
	Maintenance Manifold
	Male Aeroquip Connector
	Return Fitting Kit, Cryotorr8/8F/Cryoplex8/LP
	Supply Fitting Kit, Cryotorr10/Cryoplex10
	Supply Fitting Kit, Cryotorr8/8F/Cryoplex8/LP
Accessories » Cables/Power Supplies »	Drive Cables
	Power Supplies
	Splitter Boxes
	Temperature Monitor Cables
Accessories » Temperature Monitors&Controllers »	E1000 Temperature Controller
	E350 Temperature Monitor
	E500 Temperature Monitor
New Cryopumps »	CryoPlex 10 Cryogenic Vacuum Pump
	CryoPlex 16 Cryogenic Vacuum Pump
	CryoPlex 8 Cryogenic Vacuum Pump
	CryoPlex 8 Low Profile
	In-Situ Water Pump
New Helium Compressors » Model 600 »	Model 600 Air Cooled Compressor
	Model 600 Water Cooled Compressor
New Helium Compressors » Model 400 »	Model 400 Air Cooled Compressor
	Model 400 Water Cooled Compressor
New Helium Compressors » Model 125 »	Model 125 Air Cooled Compressor
	Model 125 Water Cooled Compressor
New Cryopumps » Regeneration » Automatic Regeneration »	Single Pump Regen Kit, 115V
	Single Pump Regen Kit, 220V
New Cryopumps » Regeneration » Manual Regeneration »	E350 Temperature Monitor
	E500 Temperature Monitor
	M310 Single Pump Temperature Monitor (no set points)
	M320 Single Pump Monitor with HIGH/LOW Set Points
Cryopump Parts » Vacuum Side Parts » Cryo-Torr 100 »	15K Condensing Array (Incl. I-CT 100, O-Ring, etc.)
	80K Condensing Array
	80K Radiation Shield (Incl. I-CT 100, O-Ring, etc.)
	Indium Gasket Set-Precut (99.99% Pure Indium)
	Pressure Relief Valve (New Improved Design)
	Purge Fitting Seal Kit
	Relief Valve Seal Kit
	Silicon Diode Retrofit Kit (Incl. Flange/Connector)
	Silicon Diode Temp. Sensor (Incl. Block and Leads)
Cryopump Parts » Coldhead Parts » Cryo-Torr 100/7 Drive »	Bearing, Cam kit
	Bushing
	Bushing
	Cap, No.1 Displacer
	Compression Spring (req. 2 per unit)
	Crankshaft
	Drive Bearing
	Exhaust Valve Body
	Expander Ring
	Front Bearing, Motor
	Inlet Valve Body
	Key, Motor Shaft
	O-Ring
	O-Ring, Bearing
	O-Ring, Cylinder
	O-Ring, Drive Rod Cap
	O-Ring, Motor
	O-Ring, Motor Housing
	O-Ring, Plug (req. 2 per unit)
	O-Ring, Valve (req. 2 per unit)
	Rear Bearing, Motor
	Repair Kit (Items Marked*)
	Retaining Ring
	Retaining Ring
	Seal Assy., Inlet Valve
	Seal Assy., Yoke
	Seal, No. 2 Displacer
	Seal, No.1 Displacer
	Valve Operator Assy.
	Valve Spring (req. 2 per unit)
	Yoke Block
	Yoke Shaft & Pins
Cryopump Parts » Vacuum Side Parts » CryoPlex8/CT8 »	15K Condensing Array ( Incl. I-CT8, O-Ring, etc.)
	80K Condensing Array (Incl. I-CT8, O-Ring, etc.)
	80K Radiation Shield (Incl. I-CT8, O-Ring, etc.)
	Hydrogen Vapor Bulb Assy. (Complete Kit)
	Indium Gasket Set-Precut (99.99% Pure Indium)
	Inlet Flange O-Ring
	Pressure Relief Valve (New Improved Design)
	Purge Fitting Seal Kit
	Regeneration Purge Fitting (Complete Assy.)
	Relief Valve Seal Kit
	Silicon Diode Retrofit Kit (Incl. Flange/Connector)
Cryopump Parts » Vacuum Side Parts » CryoPlex8LP/CT8F »	15K Condensing Array (Incl. I-CT8, O-Ring, etc.)
	80K Condensing Array (Incl. I-CT8, O-Ring, etc.)
	80K Radiation Shield ( Incl. I-CT8, O-Ring, etc.)
	Hydrogen Vapor Bulb Assy. (not on CP-8LP)
	Indium Gasket Set-Precut (99.99% Pure Indium)
	Inlet Flange O-Ring
	Pressure Relief Valve (New Improved Design)
	Purge Fitting Seal Kit
	Regeneration Purge Fitting (not on CP-8LP)
	Relief Valve Seal Kit
	Silicon Diode Retrofit Kit (Incl. Flange/Connector)
Cryopump Parts » Coldhead Parts » CryoPlex8/CT8 Drive »	Adjusting Bolt (req. 2 per unit)
	Bracket, Rocker Arm
	Bushing
	Bushing
	Bushing, Rocker Arm (req. 2 per unit)
	Cap, No.1 Displacer
	Collar Assy.
	Compression Spring (req. 2 per unit)
	Crankcase
	Crankshaft
	Dowel Pin (req. 3 per unit)
	Drive Bearing
	Drive Motor Assy.
	Exhaust Valve Body
	Gland Washer
	Gland, Scotch Yoke
	Guide Pin & Plug
	Inlet Valve Body
	Kap-Seal, Gland
	Key
	Motor Bearing (req. 2 per unit)
	Motor Front Plate
	Motor Housing
	No. I Displacer
	No.2 Displacer
	O-Ring
	O-Ring (req. 3 per unit)
	O-Ring, Crankcase
	O-Ring, Gland (req. 2 per unit)
	O-Ring, Motor (req. 2 per unit)
	O-Ring, Plug
	O-Ring, Sight Glass
	O-Ring, Valve (req. 2 per unit)
	O-Ring, Vessel
	Pin, Locating
	Pin, No.1 Displacer
	Pin, No.2 Displacer
	Plug
	Plug
	Relief Valve
	Repair Kit (Items Marked*)
	Retainer, Glass
	Retaining Ring
	Retaining Ring
	Rocker Arm & Bushing (req. 2 per unit)
	Scotch Yoke
	Seal, Inlet Valve
	Seal, No.1 Displacer
	Seal, No.2 Displacer
	Sight Glass
	Stop Nut (req. 2 per unit)
	Tool, Seal Insertion
	Trunnion Pin
	Valve Bearing (req. 2 per unit)
	Valve Eccentric
	Valve Plate
	Valve Spring (req. 2 per unit)
	Valve Stem (req. 2 per unit)
	Washer, Spring
Cryopump Parts » Vacuum Side Parts » CryoPlex10/CT10 »	15K Condensing Array (Incl. I-CT10, O-Ring, etc.)
	80K Condensing Array (Incl. I-CT10, O-Ring, etc.)
	80K Radiation Shield (Incl. I-CT10, O-Ring, etc.)
	Hydrogen Vapor Bulb Assy. (Complete Kit)
	Indium Gasket Set-Precut (99.99% Pure Indium)
	Inlet Flange 0-Ring
	Pressure Relief Valve (New Improved Design)
	Purge Fitting Seal Kit
	Regeneration Purge Fitting (Complete Assy.)
	Relief Valve Seal Kit
	Silicon Diode Retrofit Kit (Incl. Flange/Connector)
Cryopump Parts » Coldhead Parts » CryoPlex10/CT10 Drive »	0-Ring
	0-Ring (req. 3 per unit)
	0-Ring, Crankcase
	0-Ring, Motor (req. 2 per unit)
	0-Ring, Sight Glass
	0-Ring, Valve (req. 2 per unit)
	0-Ring, Vessel
	Adjusting Bolt (req. 2 per unit)
	Bracket, Rocker Arm
	Bushing
	Bushing
	Bushing, Rocker Arm (req. 2 per unit)
	Cap, No.1 Displacer
	Collar Assy.
	Compression Spring (req. 2 per unit)
	Crankcase
	Crankshaft
	Dowel Pin (req. 3 per unit)
	Drive Bearing
	Drive Motor Assy.
	Exhaust Valve Body
	Gland Washer
	Gland, Scotch Yoke
	Guide Pin & Plug
	Inlet Valve Body
	Kap-Seal, Gland
	Key
	Motor Bearing
	Motor Bearing
	Motor Front Plate
	Motor Housing
	No. 1 Displacer
	No. 2 Displacer
	O-Ring, Cylinder
	O-Ring, Gland (req. 2 per unit)
	O-Ring, Plug
	Pin, Locating
	Pin, No. 1 Displacer
	Pin, No. 2 Displacer
	Plug
	Plug
	Relief Valve
	Repair Kit (Items Marked*)
	Retainer, Glass
	Retaining Ring
	Retaining Ring
	Rocker Arm & Bushing (req. 2 per unit)
	Scotch Yoke
	Seal, Inlet Valve
	Seal, No. 2 Displacer
	Seal, No.1 Displacer
	Sight Glass
	Stop Nut (req. 2 per unit)
	Tool, Seal Insertion
	Valve Bearing (req. 2 per unit)
	Valve Eccentric
	Valve Plate
	Valve Spring (req. 2 per unit)
	Valve Stem (req. 2 per unit)
Cryopump Parts » Vacuum Side Parts » CryoPlex16/CT400 »	15K Condensing Array (Incl. I-CT400, O-Ring, etc.)
	15K Cryo-Adsorbing Array (Incl. I-CT400, O-Ring, etc.)
	80K Condensing Array (Incl. I-CT400, O-Ring, etc.)
	80K Radiation Shield (Incl. I-CT400, O-Ring, etc.)
	Hydrogen Vapor Bulb Assy. (Complete Kit)
	Indium Gasket Set-Precut (99.99% Pure Indium)
	Inlet Flange 0-Ring
	Pressure Relief Valve (New Improved Design)
	Purge Fitting Seal Kit
	Regeneration Purge Fitting (Complete Assy.)
	Relief Valve Seal Kit
	Silicon Diode Retrofit Kit (Incl. Flange/Connector)
Cryopump Parts » Coldhead Parts » CryoPlex16/CT400 Drive »	0-Ring
	0-Ring (req. 3 per unit)
	0-Ring, Crankcase
	0-Ring, Motor (req. 2 per unit)
	0-Ring, Sight Glass
	0-Ring, Valve (req. 2 per unit)
	0-Ring, Vessel
	Adjusting Bolt (req. 2 per unit)
	Bracket, Rocker Arm
	Bushing
	Bushing
	Bushing, Rocker Arm (req. 2 per unit)
	Cap, No.1 Displacer
	Collar Assy.
	Compression Spring (req. 2 per unit)
	Crankcase
	Crankshaft
	Dowel Pin (req. 3 per unit)
	Drive Bearing
	Drive Motor Assy.
	Exhaust Valve Body
	Gland Washer
	Gland, Scotch Yoke
	Guide Pin & Plug
	Inlet Valve Body
	Kap-Seal, Gland
	Key
	Motor Bearing
	Motor Bearing
	Motor Front Plate
	Motor Housing
	No. 1 Displacer
	No. 2-Displacer
	O-Ring, Cylinder
	O-Ring, Gland (req. 2 per unit)
	O-Ring, Plug
	Pin, Locating
	Pin, No. 1 Displacer
	Pin, No. 2 Displacer
	Plug
	Plug
	Relief Valve
	Repair Kit (Items Marked*)
	Retainer, Glass
	Retaining Ring
	Retaining Ring
	Rocker Arm & Bushing (req. 2 per unit)
	Scotch Yoke
	Seal, Inlet Valve
	Seal, No. 2 Displacer
	Seal, No.1 Displacer
	Sight Glass
	Stop Nut (req. 2 per unit)
	Tool, Seal Insertion
	Valve Bearing (req. 2 per unit)
	Valve Eccentric
	Valve Plate
	Valve Spring (req. 2 per unit)
	Valve Stem (req. 2 per unit)
Accessories » Regeneration » Automatic Regeneration »	Single Pump Regen Kit, 115V
	Single Pump Regen Kit, 220V
Accessories » Regeneration » Manual Regeneration »	E350 Temperature Monitor
	E500 Temperature Monitor
	M310 Single Pump Temperature Monitor (no set points)
	M320 Single Pump Monitor with HIGH/LOW Set Points
New 10K Coldheads »	1020 Cold Station Cryocooler
	1020/1050 Cold Station Single Stage
	1050 Cold Station Cryocooler
	350 Cold Station Cryocooler
	350 Cold Station Single Stage
Accessories » Regeneration Accessories »	Heater Blanket
	Purge Gas Heater
	Purge Gas Valve
	Vacuum Roughing Valve